LAPORAN 1.1.7
Masuk ke file paket tracer 1.1.7
1.jika sudah masuk tarik switch dan pc
2.lalu ambil kabel straig untuk ke f0/6 dan pc lalu ambil kabel consol untuk switch dan pc. Lalu aktifkan pc untuk memulai
3.Masuk pada pc lalu klik destop lalu ip configration
4.Masukan ip pc-a ip address gateway dan ipv6
ip:192.168.1.0 255.255.255.0(klik aja pada subnet mask)
ipv6: 2001:db8:acad:1::10/64
[yes/no]:n
switch>en
#show run
#show startup-config
#show int vlan 1
#conf t
switch(config)#int vlan 1
switch(config-if)#no sh
#exit
switch(config)#exit
Switch#show startup-config
#show int vlan 1
#conf t
switch(config)#int vlan1
switch(config-if)#no sh
switch(config-if)#exit
switch(config)#exit
Switch#exit
switch# show version
switch#show wlan
#show interface gig1/0/6
#show wlan
#show flash
#dir flash
#conf t
switch(config)#no ip domain-lookup
#hostname S1
S1 (config)#service password-encryption
#enable secret class
#banner motd #Unauthorized access is stricty prohibited#
#vlan 99
S1 (config-if)#ip address 192.168.1.2 255.255.255.0
#ipv6 address 2001:db8:acad:1::2/64
#ipv6 address fe80::2 link-local
#no sh
#end
S1#show ip int vlan 99
#conf t
switch(config)#int range g1/0/1-24
S1 (config-if-range)#switchport access vlan
S1#show ip int vlan 99
#show wlan brief
S1#conf t
S1(config)#ip default-gateway 192.168.1.1
#line console 0
#password cisco
#logging synchronous
#login
#exit
#line vty 0 15
#password cisco
#login
#exit
Masuk pada cmd/command prompt
ping 192.168.1.2
ping 2001:db8:acad:1::2
telnet 192.168.1.2

Tidak ada komentar:
Posting Komentar